പോളിയെത്തിലീൻ ടെറഫ്തലേറ്റ്

വിക്കിപീഡിയ, ഒരു സ്വതന്ത്ര വിജ്ഞാനകോശം.
(Polyethylene terephthalate എന്ന താളിൽ നിന്നും തിരിച്ചുവിട്ടതു പ്രകാരം)
പോളിയെത്തിലീൻ ടെറഫ്തലേറ്റ്
PET polymer chain
A short section of a PET polymer chain
Names
IUPAC name
Poly(ethyl benzene-1,4-dicarboxylate)
Identifiers
Abbreviations PET, PETE
ChemSpider
  • none
ECHA InfoCard 100.121.858 വിക്കിഡാറ്റയിൽ തിരുത്തുക
Properties
തന്മാത്രാ വാക്യം
Molar mass 0 g mol−1
സാന്ദ്രത 1.38 g/cm3 (20 °C),[2] amorphous: 1.370 g/cm3,[1] single crystal: 1.455 g/cm3[1]
ദ്രവണാങ്കം
ക്വഥനാങ്കം
practically insoluble[2]
log P 0.94540[3]
Thermal conductivity 0.15[4] to 0.24 W m−1 K−1[1]
Refractive index (nD) 1.57–1.58,[4] 1.5750[1]
Thermochemistry
Specific heat capacity, C 1.0 kJ/(kg·K)[1]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
| colspan=2 |  ☒N verify (what ischeckY/☒N?)

പോളിയെത്തിലീൻ ടെറഫ്തലേറ്റ് (sometimes written poly(ethylene terephthalate)), PET, PETE, (കാലഹരണപ്പെട്ട ചുരുക്കെഴുത്ത് PETP അഥവാ PET-P,) എന്ന് സാധാരണയായി ചുരുക്കി എഴുതുന്നു.ഏറ്റവും സാധാരണമാണ്. പോളിയെസ്റ്റർ കുടുംബത്തിലെ ഏറ്റവും സാധാരണയായ തെർമോപ്ലാസ്റ്റിക് പോളിമർ റെസിൻ ആണ്. വസ്ത്രങ്ങൾക്കും, ദ്രാവകങ്ങൾക്കും ഭക്ഷണസാധനങ്ങൾക്കും ഉള്ള കണ്ടെയ്നറുകൾ, ഉൽപാദനത്തിനുള്ള തെർമോഫോമിംഗ്, എൻജിനീയറിംഗ് റെസിനു വേണ്ടി ഗ്ലാസ് ഫൈബറിനൊപ്പവും ഉപയോഗിക്കാറുണ്ട്.

യു.കെ.യിലെ ടെറിലിൻ (Terylene),[5] റഷ്യയിലും സോവിയറ്റ് യൂണിയനിലും ലവ്സാൻ (Lavsan), അമേരിക്കയിൽ ഡക്രോൺ(Dacron ) എന്നിവ ബ്രാൻഡ് നാമങ്ങളെ സൂചിപ്പിക്കുന്നു .

സിന്തറ്റിക് നാരുകൾക്കും (60% കൂടുതൽ), ബോട്ടിൽ ഉല്പാദനത്തിനും ഭൂരിഭാഗം ലോക PET ഉത്പാദനം 30% ആഗോള ഡിമാൻഡ് നൽകുന്നു.[6] ടെക്സ്റ്റൈൽ ആപ്ലിക്കേഷനുകളുടെ പശ്ചാത്തലത്തിൽ, PET ന്റെ പൊതു നാമമായി ഉപയോഗിക്കുന്നത് പോളീസ്റ്റർ ആണ്. എന്നാൽ PET ആണ് സാധാരണയായി പാക്കേജിംഗുമായി ബന്ധപ്പെട്ട് ഉപയോഗിക്കുന്നത്. ലോകത്തിലെ പോളിമർ ഉത്പാദനത്തിന്റെ 18% പോളിയെസ്റ്റർ നിർമ്മിക്കുന്നു കൂടാതെ നാലാമത്തെ ഏറ്റവും നിർമ്മിത പോളിമറാണ് പോളി എഥിലീൻ (പിഇ), പോളിപ്രോപ്പിലീൻ (പിപി), പോളിവൈനൈൽ ക്ലോറൈഡ് (പിവിസി) എന്നിവ യഥാക്രമം രണ്ടും മൂന്നും നാലും ആണ്.

PET -ൽ (C10H8O4) യൂണിറ്റുകൾക്കൊപ്പം monomer ethylene terephthalate ന്റെ പോളിമറൈസ്ഡ് യൂണിറ്റുകളും ഉൾക്കൊള്ളുന്നു.

Young's modulus (E) 2800–3100 MPa
Tensile strength (σt) 55–75 MPa
Elastic limit 50–150%
notch test 3.6 kJ/m2
Glass transition temperature (Tg) 67–81 °C
Vicat B 82 °C
linear expansion coefficient (α) 7×10−5 K−1
Water absorption (ASTM) 0.16
Source[1]

See also[തിരുത്തുക]

അവലംബം[തിരുത്തുക]

  1. 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 van der Vegt, A. K.; Govaert, L. E. (2005). Polymeren, van keten tot kunstof. VSSD. ISBN 9071301486.
  2. 2.0 2.1 2.2 Record of Polyethylenterephthalat in the GESTIS Substance Database of the Institute for Occupational Safety and Health, accessed on 7 November 2007
  3. "poly(ethylene terephthalate) macromolecule_msds".
  4. 4.0 4.1 Speight, J. G.; Lange, Norbert Adolph (2005). McGraw-Hill (ed.). Lange's Handbook of Chemistry (16th ed.). pp. 2807–2758. ISBN 0-07-143220-5.
  5. The name Terylene was formed by inversion of (polyeth)ylene ter(ephthalate) and dates to the 1940s. Oxford Dictionary Archived 2014-03-31 at the Wayback Machine.. Terylene was first registered as a UK trademark in April 1946.[അവലംബം ആവശ്യമാണ്] UK Intellectual Property Office UK00000646992
  6. Ji, Li Na (June 2013). "Study on Preparation Process and Properties of Polyethylene Terephthalate (PET)". Applied Mechanics and Materials. 312: 406–410. doi:10.4028/www.scientific.net/AMM.312.406.

ബാഹ്യ ലിങ്കുകൾ[തിരുത്തുക]